Magnum Industrial MI-93050, Manual

Page: 5 / 22

- 3 -
BEFORE CUTTING
Unhook the lock chain (A) in Fig.1 to
release this saw. After service, must
replace the chain, and hook it properly for
your safety and carry. Failure to comply
with the warning could result in personal
injury and machine damage.
2. The Quick Vise and Work Set Up
Usage of the Quick Vise
Newly designed and improved “Quick Action”
vise is mounted on the machine. Three
pieces of devices & one handle simply solve
all the troubles you have met in the past.
Follow the easy steps as below. You’ll thank
for the design. We made for your
convenience.
1. Lift up the handle (A) in Fig. 2 then you
can move the vise forward and backward
with ease by holding the wheel (B) at the
left end of base.
2. Push the visejaw (C ) toward the work,
make it as close as possible against the
other visejaw which is fixed.
3. Replace handle by pressing it down.
4. Turn the wheel (B) clock-wise to make
sure the work is well located. During
operation, you shall find it more
convenient & more powerful to fulfill the
clamp job than any of traditional ones
could offer.
CAUTION !
NEVER OPERATE SAW WITHOUT
BLADE GUARDS IN PLACE.
Work Set Up
1. Raise saw head to vertical position.
2. Open vise to accept the piece to be cut
by pulling the wheel at the end of the
base.
3. Place work piece on saw bed if the piece
is long, support the end.