Page 46
©
2013 Magnum Energy, Inc
.
Appendix A – Specifi cations and Optional Equipment
A-2 Optional Equipment and Accessories
The following Magnum Energy components are available for use with the MS-PE Series inverter/
charger. Some of these items are required depending upon the intended use of the inverter.
CE Filter Box
The CE Filter Box (PN: MS-CEFB) is an EMI
fi
lter designed to control conducted emissions on the
AC and DC side of Magnum Energy MS-E and MS-PE Series inverters. It is used to ensure the
stringent international standards for electromagnetic compatibility (EMC) are met. The MS-E and
MS-PE Series inverters—when connected to the MS-CEFB—conform to CE Mark requirements for
European countries and C-Tick Mark requirements for Australia and New Zealand.
MMP-E Series Enclosures
The MMP175-E and MMP250-E enclosures are speci
fi
cally designed for European and single inverter
applications. The MMP-E Series enclosures combine all of the major components required for a
renewable energy system into a single, easy to install pre-wired enclosure. These include: inverter/
battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter
bypass switch as a convenient way to isolate the inverter for battery maintenance.
MP-E Series Enclosures
The MPSL-175PE, MPSL-250PE, MPDH-175PE, and MPDH-250PE enclosures have been speci
fi
cally
designed to combine MS-PE inverters when con
fi
gured for parallel operation. The MP-E Series
enclosures feature convenient front-mounted AC and DC connections and easy panel operation
when using the optional ME-RTR router. Choose the MP-E model based on your power capacity
needs. Each model is expandable, start with the base model and just one inverter, and in the
future add another inverter—up to four inverters total depending on your model—with ease, using
Magnum’s MPXS-PE expansion boxes.
Router Control
The ME-RTR router control display provides operating information and setup/troubleshooting
capabilities for multiple Magnum inverters. Allows up to four MS-PE inverters to be connected in
a parallel con
fi
guration for increased inverter power.
Advanced Remote Control
The ME-ARC remote control uses an LCD screen and at-a-glance LEDs to provide operating
information and to allow advanced features to be con
fi
gured (requires Magnum inverters with
advanced con
fi
gurable features). This LCD remote control also provides advanced monitoring/
troubleshooting and includes a FAVS button to access your favorite features quickly.
Standard Remote Control
The ME-RC remote control uses an LCD screen and at-a-glance LEDs display complete inverter/
charger status. Soft keys provide simple access to menus, and a rotary encoder knob allows you
to scroll through and select a wide range of settings such as: Inverter ON/OFF, Charger ON/OFF,
shorepower breaker setting, AGS control, meter displays, and Setup and Tech menus.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network version) is designed to automatically
start your generator based on low battery condition or high temperature.
The AGS controller
includes an input voltage jumper (for 12, 24, and 48-volt battery banks) and a 4-position DIP
(Dual In-line Package) switch which provides the ability to change the relay timing con
fi
gurations
to allow compatibility with a wider range of generators. T
he ME-AGS’s adjustable settings can be
used to start the generator based on: battery voltage, time of day, battery ‘State of Charge,’ or
high temperature. Includes Quiet Time with an easy to set clock. AGS settings do not interfere
with the manual start/stop operation of the generator.
Battery Monitor Kit
The ME-BMK Battery Monitor Kit is a single battery bank amp-hour meter
that monitors the condition
of the battery, and provides information to let you know how much energy you have available
and to let you plan your electrical usage to ensure the battery is not being over-discharged. The
