©
2017 Sensata Technologies
3
Introduction
Figure 1-4, Front Panel Features (CSW412)
2
1
3
4
5
6
1.2
Front/Back Features – CSW412
The CSW412 is equipped with the following front panel features (Figure 1-4):
1. Power
Indicator
– an at-a-glance LED that lights green when the
inverter is on. (see Section 3.0 Operation).
2. Fault
Indicator
– an at-a-glance LED that comes on to indicate an
inverter fault (see Section 4.0 Troubleshooting).
3. USB
Port
– allows USB-enabled devices to be powered and charged.
4. ON/OFF
Power
Switch
– a 2-position switch that turns the inverter
on and off.
5. Serial
Number
– the unique identi
fi
cation number assigned to each
unit (with a model-speci
fi
c pre
fi
x).
Note: Enter the inverter’s serial number in the table on page i. It is to easier
to record this information now, instead of trying to gather it after the unit
has been installed.
6. GFCI
– a Ground Fault Circuit Interrupter protected AC outlet. The GFCI
outlet quickly stops the
fl
ow of electricity in the event a ground fault
occurs on the device that is plugged into the inverter.
