15
MAGNIFICO Use and mantenance manual
°
C
MIN
T1
T12
T11
T16
T15
D4
2.12 Loading a stored cooking program
To access a memorised program, press the T12 Book
key and select the program number, shown on the D4
display, by turning the M knob to right or to left.Con-
firm the selection by pressing the M knob when the
disired program nuber is shown on the D4 display.
Ex.:
The T11 key will blink and it will be possible, by ro-
tating the M knob, see the phases of the program.
Select phase 1
(
step
8
1
)
and press T16 Start key
to start the program.
It is also possible to start the cooking from a diffe-
rante phase then 1 by choosing the phase number
(e.g.
step
8
3
)
and press T16 Start key to start the
program from the selected phase. In this case the
pre-heating will not work.
2.13 Modification and
cancelling of the coo-
king programs
To modify a stored program choose the program as
explained at the previous chapter (2.11). Choose
the phase number to modify by rotating the M knob.
When modification is completed, if desired, it is pos-
sible to save the modified program by pressing the
T12 key for some seconds (as explained at chapter
2.10)
It is also possible to delete a whole or a part of a pro-
gram. To cancel a part of a program choose the pha-
se number which the canceling will begin and press
the T15 key to delete the program from that phase.
(e.g. if phase 3 is selected and T15 key is pressed,
phases 3, 4, 5,.. will be cancelled). It is not possible
to delete only one phase between others.
To cancel the entire program start canceling from
phase 1.
88+
90
8
3:15
F A N
8 8
2
S T E P
8
3
P r g
8
0 4
2. Use instructions
Summary of Contents for MPE423
Page 24: ......
