12
°
C
MIN
T13
2.8 Butterfly valve
The humidity draining has the task of expelling hu-
midity formed inside the cooking chamber during the
cooking.
Upon oven switch-on the valve is always closed. At
the end of the cooking cycle the valve remains in the
position it was in at that moment.
The opening or closing of the humidity discharge val-
ve is controlled by pressing the T13 key. While the
valve is operating, it is not possible to give a new
command.
The opening of the valve is signalled by the status
change of the T13 key.
•
on: valve is open
•
off: vale is close
Even with the valve closed, there is no risk of over-
pressures inside cooking compartment as they are
controlled by the drain.
During the CONVECTION/STEAM MIXED cooking the
valve is automaticaly managed. Anyway it is possible
to change the status manually.
During STEAMING the valve will be kept in close po-
sition.
88+
90
8
3:15
F A N
8 8
2
S T E P
8
1
2. Use instructions
Summary of Contents for MPE423
Page 24: ......
