3
Make sure all mounting connections are properly in place
on the tank before installing the transmitter. Compare the
nameplate on the antenna and transmitter with the product
information; make sure the antenna type and mount are
correct for the intended installation.
1.4.1 Installing the Transmitter
Before installing, make sure the:
• Model and serial numbers on the nameplates of the
antenna and transmitter are identical.
• Antenna has adequate room for installation.
• Process temperature, pressure, dielectric, and viscosity are
within the probe specifications for the installation.
To install the transmitter:
①
Make sure the process connection is at least 1
1
⁄
2
" NPT or a
flanged mounting.
②
Carefully place the antenna into the vessel. Align the gasket
on flanged installations.
③
Align the antenna process connection with the threaded or
flanged mounting on the vessel.
④
For threaded connections, tighten the nut of the antenna
process connection. For flanged connections, tighten flange
bolts.
⑤
Rotate the transmitter to face the most convenient direction
for wiring, configuration, and viewing.
②
①
④
③
Through-Air Radar Transmitter
