3
Select OBD Coding/DTC
4
Select ID sensor coding
5
Use the arrow keys to go to the
required sensor position on the vehicle
6
Press OK, read the sensor’s ID
7
Go to the OBD connector and plug in
the tool, press OK.
If the vehicle type is “a” the display will show the sensor learning procedure steps to be
followed.
-
If the vehicle type is “b” or “c” you will have to choose whether to enable
the "automatic" procedure or to manually enter the code in the
instrument. In both cases follow the displayed instructions to correctly
perform the operations.
In case of vehicle type "A" the display will show you the operation to be carried out.
When the operation is completed, either with mode “a” or “b”, the
instrument reads the code that has just been memorised in the
control unit to check if the operation was successful, and the display
shows the relevant message.
