![background image](http://html2.mh-extra.com/html/magnetek/impulse-g-series-4/impulse-g-series-4_installation-manual_3578883016.webp)
IMPULSE®•G+/VG+ Series 4 Analog Monitor Installation Manual
August 2011
1-16
6.
Route the option wiring.
Depending on the drive model, some drives may require routing the wiring through the side of the
front cover to the outside. In these cases, cut out the perforated openings on the left side of the drive
front cover as shown in Figure 10-A and leave no sharp edges to damage wiring. Route the wiring
inside the enclosure as shown in Figure 10-B for drives that do not require routing through the front
cover.
Refer to the IMPULSE
®
•G+/VG+ Series 4 Instruction Manual for more information.
<1> The drive will not meet NEMA Type 1 requirements if wiring is exposed outside the enclosure.
Figure 10: Wire Routing Examples