IMPULSE®•G+/VG+ Series 4 Analog Monitor Installation Manual
August 2011
1-15
5.
Wire the customer-supplied circuit to the terminal block on the option. Refer to Figure 9 for wiring
instructions.
Connection Diagram
Refer to Table 3 on page 18 for a detailed description of the option board terminal functions. To
ensure accurate control, use stable power supply for the voltage reference source.
Figure 9: Option Connection Diagram
N O T I C E
Do not adjust the potentiometers on the option.
The potentiometers are factory set and may change the voltage output characteristics and
cause output signal inaccuracy if misadjusted.
