Flex 8EX / 12EX EU System Instruction Manual
March 2018
Page 24 of 66
4 Function Settings
4.1 Transmitter Handset
4.1.1
System Channel Settings
Fig. 11
Set the transmitter channel by adjusting the channel dipswitch located on the backside
of the transmitter encoder board (
see Fig. 11
). Only the first six (6) positions are used
for channel programming (
see Fig. 12
). The system channels table in
Section 5 on
page 52
illustrates which dipswitch setting corresponds to which channel. Once the
transmitter channel is altered, be sure to change the receiver channel as well. The
channel on both the transmitter and the receiver must be identical in order for the
system to work. To change the receiver channel,
see Section 4.2.1 on page 40
.
Example:
Fig. 12
The above dipswitch setting
“1 0 0 1 0 0”
corresponds to “channel 36” in the system
channels table in
Section 5 on page 52
.
7
1
4
2 3
5 6
8
CHANNEL
