Magnetek Enrange CAN-6, Instruction Manual

Page: 7 / 25

Enrange CAN-6 Instruction Manual
September 2011
Page 6 of 24
2.3 SAFETY INFORMATION & RECOMMENDED TRAINING FOR RADIO CONTROLLED
EQUIPMENT OPERATORS
Anyone being trained to operate radio controlled equipment should possess as a minimum the following
knowledge and skills before using the radio controlled equipment.
The operator should:

have knowledge of hazards pertaining to equipment operation

have knowledge of safety rules for radio controlled equipment

have the ability to judge distance of moving objects

know how to properly test prior to operation

be trained in the safe operation of the radio receiver as it pertains to the crane, hoist, lifting device or
other material handling equipment being operated

have knowledge of the use of equipment warning lights and alarms

have knowledge of the proper storage space for a radio control receiver when not in use

be trained in transferring a radio control receiver to another person

be trained how and when to report unsafe or unusual operating conditions

test the receiver emergency stop and all warning devices prior to operation; testing should be done
on each shift, without a load

be thoroughly trained and knowledgeable in proper and safe operation of the crane, hoist, lifting
device, or other material handling equipment that utilizes the radio control

know how to keep the operator and other people clear of lifted loads and to avoid “pinch” points

continuously watch and monitor status of lifted loads

know and follow cable and hook inspection procedures

know and follow the local lockout and tagout procedures when servicing radio controlled equipment

know and follow all applicable operating and maintenance manuals, safety procedures, regulatory
requirements, and industry standards and codes
The operator shall not:

lift or move more than the rated load

operate the material handling equipment if the direction of travel or function engaged does not
agree with what is indicated on the controller

use the crane, hoist or lifting device to lift, support or transport people

lift or carry any loads over people

operate the crane, hoist or lifting device unless all persons, including the operator, are and remain
clear of the supported load and any potential pinch points

operate a crane, hoist or lifting device when the device is not centered over the load