IMPULSE®•G+/VG+ Series 4 Analog Input Installation Manual - August 2011
1-13
3.
Connect one end of the ground wire (H) to the ground terminal (J) using one of the remaining
screws (G). Connect the other end of the ground wire (H) to the remaining ground terminal and
installation hole on the option (B) using the last remaining provided screw (G).
Figure 6: Connect the Ground Wire
NOTE:
1. The option package includes three ground wires. Use the longest wire when plugging
the option into connector CN5-C on the drive side. Use the next longest wire when
plugging the option into connector CN5-B. Use the shortest wire when plugging the option
into connector CN5-A. Refer to Option Package Contents on page 6 for more information.
2. There are two screw holes on the drive for use as ground terminals (J). When
connecting three options, two ground wires will need to share the same drive ground
terminal.
4.
Set DIP switches S1, S2, and S3 on the option for current or voltage input on terminals V1, V2,
and V3. The default configuration is set to voltage input for all terminals.
Figure 7: Option DIP Switches
