5.
If the PHONE 1 LED does not come on straight away, please allow 20 minutes
and check again as it may need to pull down the configuration once it connects
to the network (INTERNET LED)
6.
LED’s that should come one
a.
Power
b.
INTERNET
c.
PHONE 1
d.
If you have 2 phone lines, PHONE 2 LED should also come on
7.
You should now be able to make and receive calls
Image2 –Linksys ATA showing
LED’s
LED’S will come on when device is powered up and connected to an Ethernet wall
socket (image6). This device will be pre configured so all you need to do is connect
the device to the wall socket, power it on and connect your handset to PHONE 1 port
at the back of the device
Our ATA will be configured to use PHONE 1 at all times by default unless you have
2 phone lines with us.
