Magnescale SJ300 SJ300, Manual

Page: 6 / 76

SJ300 Series (4)
(E)
Precautions for use under the following environments
1. When using water-miscible cutting fluid or when cutting non-metal
(ceramic, glass fiber, etc.) objects.
•
Mount the scale so that it is not directly exposed to water-miscible cutting fluid or cutting
scraps.
•
Attach a scale cover to prevent water-miscible cutting fluid mist or powder from entering
the inside of the scale.
2. When mounted on a forming machine or other machine that slides at
high speed for long periods within a specific area.
•
Regularly apply oil or spray lubricant (CRC, WD40, etc.).
Be sure to implement the above measures when using the scale under the environments
noted in
1 and 2 above. Otherwise, quality cannot be assured.
General Precautions
When using Magnescale Co., Ltd. products, observe the following general precautions along
with those given specifically in this manual to ensure proper use of the products.
•
Before and during operations, be sure to check that our products function properly.
•
Provide adequate safety measures to prevent damage in case our products should develop
a malfunction.
•
Use outside indicated specifications or purposes and modification of our products will
void any warranty of the functions and performance as specified for our products.
•
When using our products in combination with other equipment, the functions and
performance as noted in this manual may not be attained, depending upon the operating
environmental conditions. Make a thorough study of the compatibility in advance.