15
English
4-3. Scale unit installation
1. Leave the scale near installation unit for about an hour so
all components will be at the same temperature when the
installtion is performed.
2.
Mount the scale unit on a surface with a fl atness of 0.4 (SL130)
/0.2 (SL331) mmp-p or less.
3.
Wipe the scale unit mounting surface and scale base mounting
surface with a clean, alcohol-moistened cloth to remove, dirt,
oil, etc. Attach the supplied double-sided adhesive tape to the
scale unit mounting surface and then stick the scale to the
machine.
4. Wipe the scale surface (rubber magnet) soft ly with clean,
alcohol-moistened cloth to remove dirt, oil, etc.
[SL130]
5. Attach the supplied double-sided adhesive tape to the scale
surface. Stick the protective ribbon to the scale from one end
while removing the lining paper.
Make sure the ribbon does not stick out from the scale edges.
[SL331]
5. Stick the protective tape to the scale from one end while
removing the lining paper.
Make sure the tape does not stick out from the scale edges.
Note
• Apply the stainless steel or polyester fi lm (provided) over the
scale for protection purpose.
• When handling the protective ribbon or tape, use care not to
bend it.
4-4. Maintenance of scale unit
When DIGIRULER is exposed to dust, chips and coolant, wipe
the scale surface soft ly with cloth occasionally.
Do not use alcohol and detergent.
