MAGNER 211
Operation Manual
V1.3
Page 10 of 16
9. Function Settings:
Press SET key to enter into Menu interface, shown as follows:
MENU
4.TOTAL
2.VALUE
5.TEST
6.LEARN
3.SYSTEM
> 1.BATCH
Directly press
，
，
，
four keys to choose target submenu
and then press SET key to enter each into detailed operation
interface:
(1)
BATCH
BATCH SET
VALUE:
CHANNEL:
0000
BATCH:
1
2.00
Enter into BATCH SET interface
，
press
，
key to switch the
channel.Under one channel, pressSET key
，
the BATCH will flash, at
this moment you can set the BATCH value through the numeric key
0 ~ 9
（
the upper limit is 9999
）
。
Press CLRkey you can clear the
BATCH setting.
NOTES
：
The above steps are used for setting the BATCH number.
If you need to set the BATCH, you need to turn on the BATCH
function in system. Under main interface, press
key to turn on
the BATCH on/off. When BATCH function is on, there is a B shown
at the left corner; if there is no B, it means the BATCH function is
turned off.
When one channel Batch No. setting is finished, you can come
back to channel number selection interface by pressing SET key and
then repeat the above number setting way to set batch number for
other target channels. After all settings are finished, press ESC key to
