Installation of Oval Base
1.
For ease of operation, lay the speaker on a table (place a cloth on the table
to protect the fabric grille).
2.
Remove the set screws from the bottom of the speaker with 1/8 inch Allen
wrench (provided).
3.
Note-- The stand-o
ff
s have a very tight
fi
t with the speaker panel. Insert the
3 1/2 inch bolts in the stand-o
ff
s and (using only your
fi
ngers) thread the
screw into the speaker. Using a #2 Phillips screwdriver, pull the stand-o
ff
onto the speaker panel using the bolts. Remove the bolts and install the
oval base.
Installation of L-feet
Install the L-feet on the back of the speaker and tighten the screws.
Revised 2-10-19
Page of
5
10
