MAGNAWELD monoTIG 160i, User Manual

Page: 11 / 84

11
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
EN
monoTIG 160i / monoTIG 200i
1
2
3
4
5
6
7
8
Monotig 160i and Monotig 200i are an inverter type portable, mono-phase DC TIG-MMA welding machine
designed for TIG welding of all kinds of thin metal sheets except aluminum & for MMA welding of all kinds of
stick electrodes up to 4 mm. Current, time and program settings can easily be monitored by digital displays.
Monotig 160, Monotig 200i proved well that it can work between 160 to 240 V 50-60 Hz line voltages.
Therefore this machine is quite immune to mains voltage fluctuations and perfectly welds with
generator-sets. Monotig 160, Monotig 200i can also be used with long welding cables up to 25 mt.
The machine is fan cooled and thermally protected against over heating.
Figure 1 : Front and Rear View
1-
Control Panel
5-
Torch Control Connections
2-
Earth Cable and Welding Cable Socket (-)
6-
Line Cable Inlet
3-
Gas Output
7-
Gas Input
4-
Earth Cable and Welding Cable Socket (+)
8-
Power Switch
TECHNICAL INFORMATION
1.1 General Information
1.2 Machine Components
Technical Information