12
EN
12
EN
CONNECTION TO AN EXTERNAL TUNER
Note
• Required cables and connecting methods differ depending on the external tuner.
For more information, please contact your external tuner provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external
tuner is turned on.
• Signal from the external tuner can be output only on CVBS output even when the power of the unit is off.
• You cannot record one channel while watching another channel.
OUT
IN
rear of your TV
external tuner
ANT. IN
rear of this unit
AUDIO IN
L
R
VIDEO IN
AUDIO OUT
L
R
VIDEO
OUT
S-VIDEO
OUT
RF coaxial cable
e.g.)
TV signal
VIDEO
IN
(
E1
)
COMPONENT
VIDEO OUTPUT
DIGITAL AUDIO
OUTPUT
PCM
/
BITSTREAM
IN
OUT
COAXIAL
L
R
L
R
Y
P
B
/
C
B
P
R
/
C
R
VIDEO OUT
AUDIO IN
AUDIO OUT
S-VIDEO
S-VIDEO
VIDEO
IN
(
E1
)
COMPONENT
VIDEO OUTPUT
IN
L
R
L
R
Y
P
B
/
C
B
P
R
/
C
R
VIDEO OUT
AUDIO IN
AUDIO OUT
S-VIDEO
VIDEO
IN
(
E1
)
IN
L
R
L
R
VIDEO OUT
AUDIO IN
AUDIO OUT
S-VIDEO
(
(
E1
E1
)
)
RCA audio cable
RCA audio cable
RCA video cable
RCA video cable
S-video cable
RF coaxial cable
or
2
Make the connection as illustrated below.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note to CATV system installer
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
ANT. IN
VHF / UHF
antenna
RF coaxial cable
Cable TV
company
or
rear of your TV
disconnect
Disconnect
2
rear of this unit
rear of your TV
VIDEO
IN
(E1)
COMPONENT
VIDEO OUTPUT
DIGITAL AUDIO
OUTPUT
PCM
/
BITSTREAM
IN
OUT
COAXIAL
L
R
L
R
Y
PB
/
CB
PR
/
CR
VIDEO OUT
AUDIO IN
AUDIO OUT
S-VIDEO
S-VIDEO
connect
1
Disconnect the power cords of the devices from the AC outlet.
This section describes how to connect this unit to an external tuner such as cable/satellite box.
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
4
After making the connection as described above, make
sure to select the appropriate video input type by
following the steps in “SETTINGS FOR THE VIDEO INPUT”
on page 13.
3
Plug in the power cords of the devices to the AC outlet.
E7EAAUD.indd 12
E7EAAUD.indd 12
2007/02/05 13:53:24
2007/02/05 13:53:24