9
English
Connecting the speakers
Use the supplied speakers only. Using other
speakers can damage the set or the sound
quality will be negatively affected.
●
Connect the wires of the left speaker to L (red
and black) and the wires of the right speaker to
R (red and black) as follows:
Open the clip of the red terminal and fully
insert the stripped portion of the coloured (or
marked) speaker wires into the socket, then
close the clip.
Open the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker wires into the socket, then
close the clip.
Warning:
Never make or change connections with
the mains supply switched on.
Speakers
Attaching the supplied speakers
As shown below, align the tabs between
the speaker and the main unit, then slide
the speakers downwards until it locks into
place. Repeat the same steps to attach the
other speaker.
●
To take off the speakers, keep the lever (found
on the back of the speaker) pressed as
RELEASE
2
shown and slide the speaker
upwards.
Installation
110V
220V
1
2
A
AC power cord
1.5V x 8 UM2 or “C” size
SPEAKER TABS
MAIN UNIT TABS
SPEAKER RELEASE
p001-p016_MME140_55-Eng
7/10/05, 10:49
9
