Magnavox MM451, Owner'S Manual

Page: 10 / 14

9
1. Press
SOURCE
button until the display reads “CD” or press CD button on the
remote.
2. Press the OPEN/CLOSE button to open the CD door, put a CD onto the CD tray
with the printed label facing up (towards you). To close the CD door, press
OPEN/CLOSE button again.
Note: Remember to remove the CD when you are finished listening.
To Play a CD When Stopped: Press the /P AIR button. The disc will play from
track 1
and play indicator appears on the display.
To Pause a CD While Playing: Press the /PA IR button. The disc will pause and
p
lay
indicator
blink
on the display. Press the /P
AIR
button again to resume
playback.
To Stop a CD While Playing: Press the STOP button.
To Change Tracks: Press / TUN- button or / TUN+ button.
To Search During Playblack: Press and hold the
/ TUN- button or / TUN+
button until the desired section is located. While searching, sound will be played at a
distorted speed. Playback returns to normal when the button is released.
REPEATING PLAYBACK OF A TRACK OR A CD
Press the REPEAT button on the main unit or remote control to circle the play
mode:
• Repeat 1---Press the REPEAT button on the main unit or remote control
once and the current track will be played continuously
• Repeat All---Press the REPEAT button again and ALL tracks on the current
disc will be played continuously.
• Normal playback --- Press REPEAT button again to resume normal
playback.
Note: Pressing the STOP button will stop playback and the play mode will
be cleared.
PROGRAM PLAY
Program play must be set when the CD is stopped. You can program up to 20
tracks in any order.
1. Press STOP button and then press
MEM /
PROG button on the
main unit or
press PROG button on the remote control.
2. Press
/ TUN- button or / TUN+ button
to select a track. The display shows
the selected track.
3. Press the
MEM /
PROG button on the
main unit or
press PROG button on the
remote control to add the track into the program list.
4. Repeat steps 2 and 3 until you complete the programming. You can program up
to 20 tracks.
To Start the Program Play: Press /PAIR button.
To Pause or Stop a Program Play: Press /PA IR or STOP button.
To Replay a Program: Press /PA
IR
button.
To Clear the Program: Press STOP button twice or open and close the CD door.
CD