14
7.
When finished listening, press and hold the
(Standby) Button on the unit or
press the
button on the Remote Control to turn the unit to Standby Mode.
NB: If you will not use the unit for an extended period of time, slide the POWER
Switch to OFF position to power off the unit then unplug the AC/DC Adaptor from
AC wall outlet.
CD:
CD Playback:
1. Power on the unit as previously instructed.
2. Press the MODE Button on the Unit or Remote Control repeatedly until “
Cd
” appear
on the display.
3. Press the
(Disc Tray Open/Close) Button on the unit or Remote Control to
open CD tray.
4. Place a CD disc on the center of tray, with the printed side face up.
5. Press the
(Disc Tray Open/Close) Button on the unit or Remote Control to close
it, play will automatically start after a few seconds.
6. During playback:
Press the
►
II/PP Button on the unit or Remote Control to pause, press again
to resume normal playback.
Press the I
◄◄
or
►►
I buttons on the unit or Remote Control repeatedly to
skip tracks.
Press the
◄◄
or
►►
buttons on the Remote Control to fast searching the
specific section then press the
►
II/PP Button to resume normal playback.
7. To stop, press the
■
(Stop) Button on the unit or Remote Control.
Repeat Playback:
1.
During playback, press the REP Button on the Remote Control once. The indicator
"
"
will appear on the display. The current track will playback repeatedly.
2.
During playback, press the REP Button twice. The indicator
"ALL
"
will appear on the display. All the tracks on the current disc will be played back
repeatedly.
3.
To cancel the repeat function, press the REP Button repeatedly until the repeat
indicator
"
"
disappears on the display.
Programmed Playback:
Up to 20 tracks can be programmed playback as follows:
1.
In CD stop playing mode, press the PROG Button on the Remote Control. “P 01”
will appear on the display. Indicator “PROG” will appear on the display and blink.
