Example:
It is now 4pm. The heater is on and you want it to shut off at 11pm
automatically. Set the timer-off function to 7 hours: the heater will cycle on and
off to maintain the set temperature. It will stop operating at 11pm and go into
standby mode.
Clean and maintenance
1. Turn the Power Control Switch to the ‘OFF’ position.
2. Disconnect the power cord from the electrical outlet.
WARNING:
Do not expose the heating elements or switches to water, cleaning
liquids or other chemicals, as fire, electrical shock, personal injury and property
damage can occur.
CAUTION: Do not use gasoline, benzene or thinner to clean your heater, as
these chemicals can cause surface damage.
1. Use a vacuum cleaner with a crevice tool to remove dust from the interior or
your heater.
2. Use a clean, soft and lightly damp cloth to gently wipe the surface of the
enclosure.
3. Allow the enclosure to dry completely prior to operating your heater.
Off-season storage instructions
1. Secure the power cord, and place your heater in its original shipping
container,
or a similar container.
2. Store the container in a cool, dry location.
Safety features
Your heater is equipped with a Tip-Over Safety Switch. When your heater tips
over, it will turn off automatically.
Your heater is equipped with an Overheat Protection System. When the
threshold temperature has been reached, your heater will turn off automatically.
To reset your heater when the Overheat Protection System has been activated,
perform the following:
1. Turn the Power Control Switch to the ‘OFF’ position, and turn the
Temperature Control Switch to the lowest setting.
2. Disconnect the power cord from the electrical outlet.
3. Allow your heater to cool down for approximately ten minutes.