Instructions
Placement of the heater
Pre-operation instructions
Note: The power cord has a polarized plug (with one blade wider than the other)
that will only fit in a polarized outlet one way. If it does not insert easily try
reversing the plug. If it still does not fit contact your electrician to replace your
outlet. DO NOT defeat the safety purpose of the polarized plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT
The control panel
symbols
Low Power Level (600W)
Medium Power Level (900W)
High Power Level (1500W)
Heating Mode
Timer Mode
Power on
Controls on product
•
: press this button after plug in to power on the heater and start operation,
or press it repeatedly to stop operation and set the heater into standby mode.
• Power
: use this button to set the power level.
• Timer
: use this button to set the timer.
•
[
+
] and [
-
]: use these buttons when setting the desired temperature, or for
ON
OFF
Turn the heater upright. Ensure legs are correctly installed and level.
Place heater on a flat and stable surface. Setting the heater on an
incline or decline may cause damage to the unit and create a hazardous
situation.
Proceed to OPERATING INSTRUCTIONS.
1.
2.
3.
Carefully remove your heater from its shipping box.(The shipping box
can be reused for off-season storage)
Place your heater on a firm, level surface.
Completely uncoil the power cord, and connect your heater directly into
a 120 Volt, grounded AC electrical outlet.
1.
2.
