– 10 –
EN
DV
D
FU
NCTI
ON
S
DVD FUNCTIONS
Please note :
• Most instructions in this manual refer to remote control use.
• This unit will automatically turn on the screen saver after 5 minutes of inactivity and into the standby mode after 25 minutes of
inactivity.
Playback
y
Before:
Turn on the TV, amplifier and any other device which are
connected to this unit. Make sure the TV and audio receiver
(not supplied) are set to the correct channel.
(
on page 11
)
Note:
• When you play back a DVD or CD-RW/-R with JPEG fi les, refer
to details on page 11.
• “ This operation is not available” may appear at the top-left
on the TV screen when the operation is prohibited by the disc
or this unit.
• Some DVD may start playback from title 2 or 3 due to specifi c
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “OSD” setting.
(Refer to page 17.)
1
Press
[STANDBY-ON]
to turn on this
unit.
2
Press
[OPEN / CLOSE
A
]
and insert a
disc with label facing up.
3
Press
[ PLAY
B
]
to start playback.
4
Press
[STOP
C
]
to stop playback.
4
3
1
2
Lights up when power is on.
Note:
• Slow forward speed is diff erent depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Slow Forward Search
Press
[ FWD
g
]
repeatedly
in the pause
mode
to select the required forward speed.
To continue playback, press
[ PLAY
B
]
.
SF 1/2
Fast Forward / Reverse Search
[ FWD
g
]
or
[ REV
h
]
repeatedly
during playback to select the required
forward or reverse speed.
To continue playback, press
[ PLAY
B
]
.
X2
Paused and Step-by-Step Playback
p y
p
y
Press
[ PAUSE
F
]
during playback.
To continue playback, press
[ PLAY
B
]
.
[ PAUSE
F
]
is pressed in the pause mode.
To continue playback, press
[ PLAY
B
]
.
Note:
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
p
y g
Resume Playback
y
[ STOP
C
]
during playback. Resume
icon will appear at the top-left on the TV
screen. Press
[ PLAY
B
]
, playback will resume
from the point at which playback was
stopped.
PRE STOP
Note:
• To cancel resume, press
[ STOP
C
]
one more time in the stop
mode.
• The resume playback information stays on even when the
power is turned off , as long as the disc stays in the unit.
Note:
• Fast forward or reverse search speed is diff erent depending on
the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Note:
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending on
the disc or playback status.
Disc Menu
Some discs contain menus which allow you to customize DVD
playback. Use
[
K
/
L
/
s
/
B
]
to select an item, then press
[ENTER]
or
[ PLAY
B
]
.
2
Zoom
1) Press
[ZOOM]
repeatedly during playback
to select the required zoom factor:
×1.5, ×2 or ×2.5.
2) Use
[
K
/
L
/
s
/
B
]
to slide the zoomed
picture across the TV screen.
3) To exit zoom function, press
[ZOOM]
repeatedly to select
“ZOOM 1”(Off).
ZOOM 2
Calling Up a Menu Screen during Playback
g p
g
y
• Press
[MENU]
to call up the disc menu.
• Press
[TOP MENU]
to call up the title menu.
2
1
4 3
Lights up when disc is played back.
