EN - 55
FUNCTION SETUP
EN
TV Screen Protection
While the setup Menu is shown, you do not operate any key on
Remote Control for 15 minutes, then setup Menu will be Clear
and TV Program can be seen.
While the Title List for CD-DA/JPEG is shown, you do not
operate any key on Remote Control for 15 minutes, then the
screen saver will be active.
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Old
Off
Sets TV Screen Protection to On.
Sets TV Screen Protection to Off.
HDMI
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
2
Set the Selected item in references below.
Note(s)
• Settings for HDMI is only available when there is HDMI
Connection.
HDMI Video Resolution
Selects an HDMI output mode.
HDMI Connection makes this unit automatically output the
most suitable resolution for your TV.
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Auto
480p
720p
1080i
1080p
Optimum setting will be Selected.
Sets HDMI resolution to 480 progressive. (good)
Sets HDMI resolution to 720 progressive.
Sets HDMI resolution to 1080 interlaced.
Sets HDMI resolution to 1080 progressive. (best)
• The HDMI mode that is not supported by the Display
device will be Skipped.
HDMI Audio Out
If you do not wish to output the Audio through HDMI, you can
set the HDMI Audio output Off.
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
• Set to “Off ” when the HDMI Sound is not output.
Old
Off
Outputs the Audio from HDMI.
Mutes the Audio from HDMI.
• Your setting will be activated.
fun-Link (HDMI CEC)
“fun-link(HDMI CEC)” allows integrated system control over
HDMI and is part of the HDMI standard.
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Old
Off
Activate HDMI CEC function.
Deactivate HDMI CEC function.
When “fun-link(HDMI CEC)” settings is set to “Old”,
“Standby Setting” will be “Normal Standby”.
• When “fun-link(HDMI CEC)” settings is set to “Old”,
functions List below will be avilable.
One Touch Play
When this unit is turned On, the TV also is turned On
and the appropriate External Input Channel will be
Selected automatically. The appropriate External Input
Channel can also be Selected on your TV automatically,
when you press
[
Q
(Power-ON) ], [
A
(Open/
Close) ], [
B
(Play) ], [ TITLE ], [ SCHEDULE
REC. ], [ HOME ], [ SOURCE ], [ CH +/
−
], [ the
Number buttons ]
when you the unit's Power is
On.
Standby
When you press and hold
[
Q
(Power-ON) ]
for 2
seconds, it turns Off the Power to the Standby mode
on the TV first and then also turns the Power Off on
this unit also.
System Information Get & Set Menu Language
This unit recognizes the Language set for the TV and
automatically sets the same Language on the Menu for
this unit.
If you would like to use this function, set to
“Auto(XXX)” (Refer to ‘Language’ on page 53).
Continued on next page.
EN.indd 55
2015/09/02 19:01:05
