background image

DC-12V

L

R

FM ANT

7

2. Connect the AC/DC Adapter into a conveniently located AC outlet having AC 100-240V~, 50/60Hz.

Power Source

1. Connect the small plug from the supplied AC/DC Adaptor to the DC IN jack on the rear of unit.

Notes:

~   This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.

~   To save energy, unplug the AC/DC Adaptor from wall outlet if not using the unit for extended periods.

To AC outlet

AC/DC Adapter

To the DC IN jack
on the rear of the unit

Operation

General Operation:

1. Connect the unit to AC power as instructed previously. 

4. Turn the Function selector to the desired position.

the unit. The indicators will shut off.

3. Turn the Power ON-OFF/Volume control knob clockwise to power on the unit and set the volume to the desired level. 

5. When finished listening, turn the Power ON-OFF/Volume control knob counterclockwise until “Click” is heard to shut off

The Red indicator on the front of the unit will illuminate.

1

2

Metallic buckle on the sides

2. Unlock the metallic buckle on the sides then open the top cover as illustrated below:

3

Summary of Contents for MD708















Reviews: