TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or
service center.
WARNING:
Under no circumstances should you try to repair the set yourself, as this
will invalidate the warranty. Do not open the set as there is a risk of
electric shock.
Problem
–
Possible Cause
• Remedy
No sound/power
–
Volume not adjusted
• Adjust the volume
Occasional crackling sound during FM broadcast
–
Weak signal
• Adjust the position of the power cord
Continuous crackling/hiss disturbance during AM broadcast
–
Electrical interference from TV, computer, fluorescent lamp, etc.
• Move set away from other electrical equipment
The alarm does not function
–
Alarm time not set and or alarm mode not selected
• Set the alarm time and / select alarm mode
–
Volume too low for RADIO
• Adjust the volume
–
Radio alarm not adjusted to radio station
• Tune to a radio station
MCR140-37-EN 12/6/07 14:04 Page 8