English
CONTROLS
Top View
(see fig.
1
)
1
SET TIME /ALARM OFF
- sets the clock time
- stops the active alarm for 24 hours
- switches off the radio sleep function
2
SET ALARM 1 / SET ALARM 2
- sets the alarm time for alarm 1 / alarm 2
3
AL1/ AL2 /AL1+2
- selects which alarm(s) you want to set alarm time on
4
REPEAT ALARM
- switches off the active alarm for a 7-8 minutes period
5
OFF/ ON/ AUTO/ BUZZ
OFF
: switches off the radio/alarm
ON
: switches on the radio
AUTO
: activates the radio for alarm
BUZZ
: activates the buzzer for alarm
6
TIME SET
3
- to adjust time fast forward
7
TIME SET
4
- to adjust time back
8
SLEEP
- activates the radio for sleep function
- adjusts the sleep period
Front View
(see fig.
2
)
9
ALARM 1
indicator - lights up when alarm 1 is activated.
0
ALARM 2
indicator - lights up when alarm 2 is activated.
!
DISPLAY
- shows the clock/alarm time and status of the setting
@
Frequency
pointer - shows the radio frequency of your selected waveband
#
PM
indicator -lights up when time is PM.
Back View
(see fig.
3
)
$
Battery door
- opens to store a
9 volts 6F22
battery (not included) for clock
memory backup.
%
TUNING
- tunes to radio stations
^
FM/AM -
selects FM/AM waveband
&
BRIGHTNESS (High or Low)
-selects display brightness
*
Power cord
- for power supply and to improve FM reception
(
VOLUME
- adjusts the sound level
INSTALLATION
POWER SUPPLY
1
Check if the power supply, as shown on the
type plate located on the bot-
tom of the set
, corresponds to your local power supply. If it does not, consult
your dealer or service center.
2
Connect the power cord to the wall outlet.
3
To disconnect the set from the power supply completely, remove the
plug from the wall outlet.
SELECTING DISPLAY BRIGHTNESS
This set allows you to choose high or low brightness of display.
• Adjust
BRIGHTNESS
switch (located on the rear of the set) to
HIGH
or
LOW
position.
MCR140-37-EN 12/6/07 14:04 Page 5