background image

Before Using the TV/VCR  5

Using the Remote Control

Point the remote control at the TV/VCR’s remote sensor.

Do not put objects between the remote control and the
TV/VCR.

TV/VCR Maintenance

In this TV/VCR, use only tapes with the        mark.

Remove any light adhesive stick-on notes from the video cas-
sette tape before putting the tape in the TV/VCR. Removable
labels can jam the TV/VCR.

The TV/VCR requires periodic maintenance to maintain its
excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually
require cleaning or replacement. Only an authorized service
center should perform this service.

1

2

1

2

3

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bot-
tom of the remote control by sliding the lid down and
off, following the direction of the arrow on the lid.

2

Place two AA batteries inside the battery com-
partment 
with their + and – ends aligned as indicated.

3

Replace the battery compartment lid.

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on
the battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon
with alkaline; and
Remove batteries when the unit will not be used for a long
time.

Recording Prevention

Video cassette tapes have record tabs to ensure you do not
erase recordings accidentally.

1

To prevent accidental recording, break off the
tab with a screwdriver.

2

To record again, cover the hole with cellophane
tape.

•  Your new product, its packaging,

and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that
needs to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed
of as small chemical waste.
Please find out about the local
regulations on disposal of your old
product, batteries, manual, and
packaging when you replace exist-
ing equipment.

Helpful Hint

MC09D1MG  3/22/02  1:15 PM  Page 5

Summary of Contents for MC09D1MG - Tv/vcr Combination - Mono













































Reviews: