14
English
8240 009 34231
Demonstration mode
The system has a demonstration mode that
shows the various available features.
To activate the demonstration
●
In standby mode
, press and hold
Ç
on the
system until "
WELCOME
" is displayed.
➜
The demonstration will begin.
To deactivate the demonstration
●
Press and hold
Ç
on the system until
"
DEMO OFF
" is displayed.
➜
The system will switch to standby mode.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Switching the system on
In standby/demonstration mode
●
Press
STANDBY ON
to switch on the last
selected source.
●
Press
CD 1/2/3
,
TUNER
or
TAPE
(
TAPE 1/2
).
●
Press
CD OPEN/CLOSE
.
➜
The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
●
Press and hold
Ç
on the system.
In any other source mode
●
Press
STANDBY ON
(or
B
on the remote
control).
➜
The clock will appear on the display when the
system is in standby mode.
Dim mode
You can select the desired brightness for the
display.
●
In any source mode (except standby mode),
press
DIM
repeatedly to select : DIM 1, DIM 2,
DIM 3 or DIM OFF.
➜
DIM
is shown, except for DIM OFF mode.
DIM
mode
1
2
3
OFF
Brightness
normal
half
half
normal
Spectrum
Analyzer
off
on
off
on
Note:
– In standby mode, pressing DIM to select half or
full brightness for clock display.
Volume control
Press
MASTER VOLUME
3
or
4
(
VOL
+
or
-
on the remote control) to increase or
decrease the volume level.
To listen through the headphones
●
Connect the headphones plug to
the
n
socket at the front of the
system.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press
MUTE
on the remote control.
➜
Playback will continue without sound and
"
MUTE
" is displayed.
●
To restore the volume, press
MUTE
again or
increase the volume level.
Basic Functions
