43
EN
43
EN
Recording
Basic Setup
Connections
Playback
Editing
Introduction
Function Setup
Others
Español
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
5
Press [STOP
C
] to stop recording.
As for DVD recording, the title list will appear
automatically after writing to a disc complete.
(Refer to “Guide to a Title List” on page 79.)
e.g.) DVD+R
Writing to Disc
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
90%
1
SP(2Hr)
2
EMPTY TITLE
1:41:17 SP (2Hr)
NOV/21/08 11:00AM CH12 SP
NOV/21/08 0:20:44
• Press
[STOP
C
]
to exit the title list.
4
Press [REC] to start recording.
“
I
HDD” or “
I
DVD” will be displayed for 4 seconds.
e.g.) DVD
I
DVD
Press
[PAUSE
F
]
to pause recording.
Press
[PAUSE
F]
]
or
[REC]
again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press
[REC]
repeatedly until the desired recording time
(30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
0h30m
1h00m
(normal recording)
5h30m
6h00m
I
0h30m
To change the recording length during the one-
touch timer recording:
Press
[REC]
repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press
[STOP
C
]
.
When the recording is completed, the unit will ask
you whether to turn off the unit except under
conditions listed below.
- If a timer recording is programmed to start in 5 minutes.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned off automatically if you select
“Yes” or if you do not reply in 1 minute.
Note
• When you press
[REC]
,
recording starts immediately and continues until the HDD or disc is full, record 12 hours to
HDD or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing
[HDD]
or
[DVD]
during HDD / DVD
recording. And then follow the normal playback procedure.
• If playback and recording are in progress at the same time, select the appropriate component by pressing
[HDD]
or
[DVD]
before you press
[PAUSE
F
]
or
[STOP
C
]
to pause or stop the operation.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY]
to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using
[REC]
on the remote control.
• You cannot use the pause function during one-touch timer recording.
E2M01UD_H2160MW9_EN.indd 43
E2M01UD_H2160MW9_EN.indd 43
2008/04/15 19:58:01
2008/04/15 19:58:01
