Magnavox H2080MW8, Service Manual

Page: 13 / 67

1-6-2 E2H00DC
R
Reference Notes
1. Locking Tabs (L-1) ,(L-2) and (L-3) are fragile. Be
careful not to break them.
1-1. Release five Locking Tabs (L-1).
1-2. Release three Locking Tabs (L-2) and
remove the Front Assembly.
1-3. Release two Locking Tabs (L-3).
2. The DVD Mechanism & DVD/HDD Main CBA
Assembly is adjusted as a unit at factory.
Therefore, do not disassemble it.
Replace the DVD Mechanism & DVD/HDD Main
CBA Assembly as a unit.
3. Whenever you have replaced the Hard Disk Drive,
initialize the Hard Disk Drive. To initialize the Hard
Disk Drive, perform the following.
3-1. To put the HDD & DVD Recorder into the
HDD mode, press the [HDD] button on the
remote control unit.
3-2. To put the HDD & DVD Recorder into the self-
check mode, after pressing [V.SKIP] button,
press the [0], [7], and [9] buttons on the
remote control unit in that order within three
seconds.
3-3. Press [OK] button. The HDD & DVD
Recorder is initialized and the power is turned
off automatically after two seconds.
(S-1)
(S-1)
(S-1)
[1] Top Cover
Fig. D1
Fig. D2
[2] Front Unit
CN1003
CN6003
CN1061
(L-1)
(L-1)
(L-1)
(L-2)
Fig. D3
[3] Front Assembly
[5] Power SW CBA
(S-2)
CN1063
[4] Front SW CBA
(L-3)
Fig. D4
[6] HDD
Assembly
[7]
*
DVD Mechanism
& DVD/HDD Main
CBA Assembly
PCB Support / PCB Spacers
(S-3)
CN1002
(S-4)
(S-5)
CN501
CN701
CN101
(S-3)
CN651
M-PCB Plate
Earth
*
See Reference Notes 2.