1 Notice
MAGNAVOX is a registered trademark of Koninklijke Philips N.V.
and is used under license from Koninklijke Philips N.V.
Funai reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
The material in this Owner’s manual is believed adequate for the
intended use of the system. If the product or its individual modules
or procedures are used for purposes other than those specified
herein, confirmation of their validity and suitability must be
obtained. Funai warrants that the material itself does not infringe
any United States patents. No further warranty is expressed or
implied.
Funai cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the
content in this document. Errors reported to Funai will be adapted
and published on the Funai support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it
has effective pixels of 99.999% or more, black dots or bright
points of light (red, green or blue) may appear constantly on the
screen. This is a structural property of the display (within common
industry standards) and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove
covers to the inside of the product. Repairs may only be done by
service centers and official repair shops. Failure to do so shall void
any warranty, stated or implied.
Any operation expressly prohibited in this Owner’s manual, any
adjustments or assembly procedures not recommended or
authorized in this Owner’s manual shall void the warranty.
Federal communications commission notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and the
receiver.
●
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
●
Consult the dealer or an experienced radio or television
technician for help.
Declaration of conformity
Trade name
:
MAGNAVOX
Responsible party
:
FUNAI CORPORATION, Inc.
Model
:
55ME345V
Address
:
19900 Van Ness Avenue, Torrance, CA
90501 U.S.A.
Telephone number
:
1 866 341 3738
Modifications
This apparatus may generate or use radio frequency energy.
Changes or modifications to this apparatus may cause harmful
interference.
Any modifications to the apparatus must be approved by Funai.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables
with metallic RFI / EMI connector hoods to maintain compliance
with FCC Rules and regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Analog and digital television receiving apparatus, Canada BETS-7 /
NTMR-7.
Positioning the TV
●
Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
●
Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
●
Install the unit in a horizontal and stable
position.
●
Do not install the unit in direct sunlight or
in a place subject to dust or strong
vibration.
●
Depending on the environment, the
temperature of this unit may increase slightly. This is not a
malfunction.
●
Avoid a place with drastic temperature changes.
●
Do not place anything directly on top or bottom of the Unit.
●
Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the unit is placed
too close to them. In this case, please ensure enough space
between the external devices and the unit.
●
Do not insert the AC power cord into the power socket outlet
before all the connections are made.
●
Ensure that you always have easy access to the AC power cord
and outlet to disconnect the TV from the AC outlet.
●
Before you move the TV, disconnect attached cables to prevent
damage to connectors, especially the TV tuner.
●
Be sure to unplug the AC power plug from the AC outlet before
moving or carrying the unit.
●
When moving the TV and then setting it down, please be careful
not to pinch the AC power cord under the unit.
●
Do not place this unit in an area where it may be exposed to
water, oil or grease such as:
near a bathtub, basin, kitchen sink, washing tub, swimming
pool, kitchen exhaust fan, etc., or in a damp basement.
5
.
English
