background image

1 Notice

MAGNAVOX is a registered trademark of Koninklijke Philips N.V. and

is used under license from Koninklijke Philips N.V.
Funai reserves the right to change products at any time without being

obliged to adjust earlier supplies accordingly.

The material in this Owner’s manual is believed adequate for the

intended use of the system. If the product or its individual modules

or procedures are used for purposes other than those specified

herein, confirmation of their validity and suitability must be obtained.

Funai warrants that the material itself does not infringe any United

States patents. No further warranty is expressed or implied.

Funai cannot be held responsible neither for any errors in the content

of this document nor for any problems as a result of the content in

this document. Errors reported to Funai will be adapted and published

on the Funai support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has

effective pixels of 99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly on the screen. This

is a structural property of the display (within common industry

standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers

to the inside of the product. Repairs may only be done by service

centers and official repair shops. Failure to do so shall void any

warranty, stated or implied.
Any operation expressly prohibited in this Owner’s manual, any

adjustments or assembly procedures not recommended or authorized

in this Owner’s manual shall void the warranty.

Federal communications commission notice

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio or television technician

for help.

This device complies with Part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) This device must accept any interference

received, including interference that may cause undesired operation.

Declaration of conformity

Trade name

:

MAGNAVOX

Responsible party

:

FUNAI CORPORATION, Inc.

Model

:

32ME306V

Address

:

19900 Van Ness Avenue, Torrance, CA

90501 U.S.A.

Telephone number

:

1 866 341 3738

Modifications

This apparatus may generate or use radio frequency energy. Changes

or modifications to this apparatus may cause harmful interference.
Any modifications to the apparatus must be approved by Funai.
The user could lose the authority to operate this apparatus if an

unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with

metallic RFI / EMI connector hoods to maintain compliance with FCC

Rules and regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B)

Analog and digital television receiving apparatus, Canada BETS-7 /

NTMR-7.

Positioning the TV

Large screen TVs are heavy. 2 people are required to carry and

handle a large screen TV.

Make sure to hold the upper and bottom

frames of the unit firmly as illustrated.

Install the unit in a horizontal and stable

position.

Do not install the unit in direct sunlight or

in a place subject to dust or strong

vibration.

Depending on the environment, the

temperature of this unit may increase slightly. This is not a

malfunction.

When installing this unit in a temperate environment, avoid a place

with rapid temperature changes.

Operating temperature: 41°F (5°C) to 104°F (40°C)

This unit should not be used in a tropical environment as it has not

been evaluated under such conditions.

No objects should be placed directly on or under this unit, especially

lighted candles or other flaming objects.

Depending on your external devices, noise or disturbance of the

picture and / or sound may be generated if the unit is placed too

close to them. In this case, please ensure enough space between

the external devices and the unit.

Do not insert the AC power cord into the power socket outlet before

all the connections are made.

Ensure that you always have easy access to the AC power cord and

outlet to disconnect the TV from the AC outlet.

Before you move the TV, disconnect attached cables to prevent

damage to connectors, especially the TV tuner.

Be sure to unplug the AC power plug from the AC outlet before

moving or carrying the unit.

When moving the TV and then setting it down, please be careful not

to pinch the AC power cord under the unit.

Do not place this unit in an area where it may be exposed to water,

oil or grease such as:

near a bathtub, basin, kitchen sink, washing tub, swimming pool,

kitchen exhaust fan, etc., or in a damp basement.

Regulatory notices

WARNING :

To prevent injury, this apparatus must be securely

attached to the furniture / wall in accordance with the

instructions. Tipping, shaking or rocking the unit may

cause injury / death.

WARNING :

Never place a TV in an unstable location. A TV may fall,

causing serious personal injury or death. Many injuries,

particularly to children, can be avoided by taking simple

precautions such as:

Using cabinets or stands recommended by the

manufacturer of the TV.

Only using furniture that can safely support the TV.

Ensuring the TV is not overhanging the edge of the

supporting furniture.

Not placing the TV on tall furniture (for example,

cupboards or bookcases) without anchoring both

the furniture and the TV to a suitable support.

Not placing the TV on cloth or other materials that

may be located between the TV and supporting

furniture.

Educating the children about the dangers of

climbing on furniture to reach the TV or its controls.

5

.

English

Summary of Contents for 32ME306V








































Reviews: