4
Use of the remote control RC4334
Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
Remark: in VGA mode only some buttons are valid.
* Manufactured under license from Dolby Laboratories.
‘Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories.
INFO
Display information
To display the channel number, the
name (if it exists), the time, the sound
mode and the time remaining on the
timer.
Press again to display the ratings
selected.The volume level and the
smart control adjustments are then
displayed each time they are used.
®ºÒ‡π†
Audio and Video equipment buttons.
TV / PC
Press one of these buttons to switch
the television between TV or PC
mode.
SURR
Sound mode
Incredible surround
With stereo transmission, and when
Incredible surround is selected, it
seems as though the loudspeakers
are spread further apart from one
another.
Virtual Dolby Surround
Optimal with Dolby surround *
signals. Enables you to experience the
effect of Dolby Surround Pro Logic,
reproducing a rear sound effect. See
Sound menu, Dolby Virtual p. 2.
Note:You can make the same selection in
the Sound menu, Dolby Virtual, p. 2.
HD
Press this button to use the
remote control directly in the HD
mode for HD devices (eg. Set Top
box).
Press 1x for
HD-A
mode,
press 2x for
HD-D
mode.
OK
Press this button to display the
program list or to activate your
choice or to confirm when in the
menus.
MENU
Main menu on/off. See p. 2.
CC
Closed Caption
On/Off/On during mute
V
To adjust the volume.
¬
Interrupt the sound or restore it.
P
Channel selection
To browse through the TV channels
or sources stored.
0/9 Digit buttons
To select a TV channel.
For a two digit program number,
enter the second digit before the
dash disappears.To switch
immediately to a selected one digit
TV channel, keep the digit button
pressed a bit longer.
AV+
Keep this button pressed and
then press repeatedly to select
AV1
(CVBS),
CVI
(YPbPr 1Fh),
AV2
,
REAR
or
TV channels
when in TV
mode, according to where you
connected the accessory devices
(p. 9).
- To type the digital separator for
digital channels.
SLEEP TIMER
To select the length of time before
the set automatically turns off (from
15 to 240 minutes).
PIP
When in VGA or HDMI Mode,
pressing the
PIP
button will bring
up a smaller second window within
your main screen enabling you to
watch a TV channel and a picture
from a device connected to
AV3
, at
the same time.
¬
+
-
V
+
-
P
VCR DVD TV SAT AMP
CC
MENU
1
2
3
4
5
6
7
8
9
0
ACTIVE
SLEEP
B
POWER
OK
®
®
®
®
AUTO
AUTO
a
M
Ò
®
‡
π
º
†
INFO
TV
PC
SURF
FORMAT
HD
SURR
SELECT
CONTROL
PIP
TIMER
SAP
-
AV+
VCR DVD TV SAT AMP
Press the
SELECT
button
repeatedly to select one of the
system modes in which the remote
control can be used. If no action is
being undertaken within 2 seconds,
the remote control returns to TV
mode. After an action in the
selected system mode the remote
control will remain in this mode for
60 seconds and will then return to
TV mode.
POWER
B
Press to turn the TV on or off.
The TV is never powered off completely
unless it is physically unplugged.
002 28-09-2004 10:35 Pagina 4