English
13
4 Use your TV
Switching on your TV and putting it in standby
mode
To Turn Power On or to Turn Standby On
• Touch or press
.
on the front panel or the remote control.
Note
•
Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
Adjusting volume
•
The above image is an example for 32 inch and larger screen size TVs.
It may differ depending on what product you purchased.
To increase or decrease volume
• Touch
VOL
◄(down) / ►(up) on the front panel or press
VOL + / −
on the remote control.
To mute or unmute sound
• Press on the remote control to mute the sound.
• Press again or
VOL + / −
to recover the original sound.
Switching channels
•
The above image is an example for 32 inch and larger screen size TVs.
It may differ depending on what product you purchased.
To select Channels by using CH ▲/▼ or CH + / −
• Touch
CH
▲(up) / ▼(down)
on the front panel or press
CH + / −
on the remote control.
To select Channels by using the NUMBER buttons
DigitalTVoperation
• For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
– When selecting Digital channel 11.1
Be sure to press
•
before entering the subchannel number.
Analog/CableTVoperation
– When selecting cable or Analog channel 11
Press
PREV.CH
to return to the previously viewed channel.
Note
•
To select the non-memorized channels, use
the NUMBER buttons.
•
No Signal
will appear on the TV screen after the subchannel broadcast is over.
•
Audio only program
message will appear on the TV screen, when you receive only
sound signal.
