16
EN
P
REPARATION
[PC Connection]
This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor.
Use an VGA cable for this connection and it requires stereo mini plug audio cable as well.
e.g.)
The following signals can be displayed:
Format
Resolution
Refresh rate
Format
Resolution
Refresh rate
VGA
640 x 480
60Hz
WXGA
1,280 x 768
60Hz
SVGA
800 x 600
60Hz
1,360 x 768
60Hz
XGA
1,024 x 768
60Hz
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the VGA cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connection is completed.
Caution:
• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.
5
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
rear of this unit
AC power cord
AC outlet
stereo mini-plug audio cable
VGA cable
rear of this unit
VGA cable should be
with ferrite core.
personal computer
