Connecting to Your TV Antenna, PC, DVD/VCR etc.
Accessory Pack
Unpack all the parts.
Power cable
Remote control & batteries
Power adapter
Setting up and connecting your TV
Ensure that the power to the monitor/TV is switched off before the installation.
A) Connecting to PC computer
1. Connect the power cord to the DC IN power connector on the back of the monitor.
2. Connect the 15-pin D-SUB of the video signal cable to the VGA connector on the back of the monitor
Note: If you use an Apple Macitosh
TM
, you need to connect the special Mac adapter to one end of the
monitor signal cable.
3.
Connect the stereo audio cable to PC AUDIO IN on the back of the monitor and the other end to AUDIO
OUT terminal of the sound card on your PC.
17
