background image

4

A

NTENNA

 TV

A combination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only 
one 75 Ω (ohm) antenna jack on the side of your TV, and that’s where the antenna goes.

If your antenna has a round cable (75 ohm) on the end, then 

you’re ready to connect it to the LCD TV. If your antenna 
has flat, twin-lead wire (300 ohm), you first need to at-

tach the antenna wires to the screws on a 300- to 75-ohm 
adapter(not supplied). 

Connect the antenna (or adapter) to one end of the 

supplied L-Adapter as shown, and connect the other end of 

the L-Adapter to the TV jack on the side of the LCD TV.

Plug the DC adapter into the DC IN 16V jack on the LCD 
TV. Plug the power cable into an outlet and switch TV set on.

Run the AUTO PROGRAM function to set up the TV for the 

broadcast or cable channels available in your area. If you do 
not run the auto program function to set up the channels , 
your television may not operate properly. 

1

2

1

Antenna

with 75

cable

Rear Jack panel of

Television

Outdoor or Indoor Antenna

(Combination VHF/UHF)

OR

2

Twin-lead

wire to

300-75

adapter

DC Adapter

Power

Cable

3

Your Cable TV input into your home may be a single (75 ohm) cable or use a cable box decoder. In either case the connection is very 
simple. Follow the steps below to connect your cable signal to your new television.

Direct cable connections:

Connect the Cable TV signal to one end of the supplied 
L-Adapter as shown, and connect the other end of the 

adapter to the TV jack on the LCD TV.

Plug the DC adapter into the DC IN 16V jack on the LCD 
TV. Plug the power cable into an outlet and switch TV set on.

Run the AUTO PROGRAM function to set up the TV for the 
broadcast or cable channels available in your area. If you do 

not run the auto program function to set up the channels , 

your television may not operate properly. 

1

3

2

B

ASIC

 C

ABLE

 TV C

ONNECTION

1

The Cable TV signal from

Cable Company

(75

coaxial cable)

Rear Jack panel of

Television

DC

L Adapter

Adapter

Power

Cable

2

4

3

 

 

 

 

 

 

 

 

•  Remember, an antenna or cable TV signal must first be connected to  
  your LCD TV.
•  Please make sure that you have selected the TV mode with source key  
  on your remote control, before installing TV channels.

H

ELPFUL

 H

INT

 

 

 

 

 

 

 

 

•  Remember, an antenna or cable TV signal must first be connected to  
  your LCD TV.

•  Please make sure that you have selected the TV mode with source key  
  on your remote control, before installing TV channels.

H

ELPFUL

 H

INT

Summary of Contents for 15MF605T - 15" Lcd Tv









Reviews: