Magnat Audio INTERIOR CINEMA 2.1 VA, Owner'S Manual

Page: 9 / 40

9
GB
Dear MAGNAT Customer,
Congratulations on your fine new loudspeakers and thank you very much for choosing MAGNAT! You
have made an excellent choice. The high-quality speakers produced by MAGNAT are renowned all over
the world.
Please study the instructions and information below carefully before using your new loudspeakers.
IMPORTANT SAFETY PRECAUTIONSPlease read through the instruction manual carefully before
starting to use the device. This manual contains important information concerning operation
and safety aspects. It is imperative you observe all of the information. Keep the manual in a safe
location.
• WARNING NOTICES: All of the warning symbols on the speakers, accessories and in the instruction
manual itself must be adhered to.
• EXPOSURE TO HEAT: Only operate the speakers and accessories in a temperature range from
10°C to 40°C.
• The speakers should not be positioned near heat sources (heaters, ovens, radiant heaters, naked
flames, etc.). When setting up close to an amplifier a minimum distance of 10 cm must be maintained.
The distance between the active subwoofer enclosure and the walls of the room or other objects
(e. g. furniture, shelf units) may not be less than 5 cm on any side.
• The aluminium plate and cooling fins of the amplifier at the rear of the active subwoofer serve to cool
the built-in amplifier; for this reason, they must also be at least 5 cm away from all objects and must
not be covered (e.g. by a curtain).
• EFFECT OF MOISTURE: The speakers should not be exposed to dripping or splash water. Neither
should they be used to support vases or other containers filled with liquid. Do not expose the speakers
to water or high levels of humidity. There is a danger of electric shock. In the event of contact with
moisture or liquids remove the mains adapter immediately.
• FOREIGN MATERIAL: Ensure that no foreign material enters through the speaker openings and into
the interior. This could trigger short circuits and even result in electric shock and fire.
• CLEANING: Please use a soft, dry cloth with no cleaning agents, sprays or chemical solvents, as
these could damage the surfaces.
• ELECTRICAL CONNECTION: Please note the voltage levels on the information sign. The mains
adapter for the speakers should only be operated with the voltage and frequency values specified
on the sign.
• LIGHTNING PROTECTION/PREVENTIVE MEASURES: If the device is not going to be used for a
prolonged period (e.g. when on holiday), it should be disconnected from the mains by removing the
plug. The device should also be disconnected from the mains in the event of a thunderstorm. Doing
this will prevent damage caused by lightning and overvoltage.
• MAINS CABLE: The mains cable must always be suitable for operation and it should only ever be laid
out in a manner that prevents it from being trodden on. It should not be pinched by objects either, as
this can damage the cable. When using plugs and power strips it must be ensured that the cable is
not kinked at the point where it emerges from the socket. Do not connect or remove the mains cable
with damp hands.
• OVERLOAD: Sockets, power strips and extension cables should not be overloaded. If an overload
occurs, there is a risk of electric shock and fire.
• SETTING UP: Please read the installation instructions. If you want to mount the speakers on the wall,
follow the description in the installation instructions.
• The speakers should only be positioned or mounted on a solid surface and not on moving base
frames, otherwise there is a risk of injury.
• Repairs must always be conducted by qualified specialists, as you might otherwise be exposed to
dangerous high voltage levels or other hazards.