Page 16
2) SETUP OPTIONS INFORMATION
A) GENERAL SETUP
The GENERAL SETUP options are illustrated below:
z
TV DISPLAY
Normal / PS (Pan & Scan)
: Choose this setting if your
DVD player is connected to a normal aspect ratio TV
(4:3). A standard edition movie (4:3) will fill the entire
screen of your TV. This might mean that parts of the
picture (the left and right edges) won’t be seen.
Normal / LB (Letter Box)
: Choose this setting if your
DVD player is connected to a normal aspect ratio TV
(4:3). You will see the movies in its original aspect ratio.
You will also see the entire frame of the movie but it
might appear with black bars at the top and bottom of the
screen.
Wide
: Choose this setting if your DVD player is
connected to a widescreen TV (15:9 or 16:9). If you have
selected this setting but you don’t have a wide screen
TV, the images on the screen may appear distorted due
to vertical compression.
z
ANGLE MARK
Choose ANGLE MARK as ON, whenever the movie is
recorded with different angles, there will be an icon on
the TV screen so as to remind you that the movie under
currently playing is with different angles. Thus, you could
press the ANGLE button to view the movie in different
angles.
If you choose the ANGLE MARK as OFF, you have to
be sure about the moive whether it comes with different
angles or not as there would not be a reminder to you.
Note:-
ANGLE MARK is ONLY applicable to the movie disc
which is recorded with different angles.
z
OSD LANG
Highlight the OSD LANGUAGE option and press ENTER
button to access the OSD LANGUAGE options menu.
Press
▲▼
buttons to choose the OSD language you
prefer. Press ENTER to confirm your selection and the
OSD content will now be displayed in the language you
have chosen.
