If the alarm clock is unplugged when an alarm is enabled, the battery
backup feature will ensure the alarm sounds. To disable the alarm
without connecting to power, remove the battery from the back
of the unit.
DISABLING BATTERY BACKUP
This alarm clock is equipped with a battery backup feature. This feature
will restore your alarm clock settings as well as ensure your alarm
sounds in the event of a power outage. The 3V, CR2032 Flat Lithium
battery is pre-installed. Should you need to replace the battery, please
read the following instructions.
BATTERY BACKUP
• Batteries must be installed by an adult.
• Use only the recommended size and type of battery specified.
• Please be sure to follow the correct polarity when installing the
battery in the battery compartment. A reversed battery may
cause damage to the clock radio.
• When not using the unit for a prolonged period of time, please
remove the battery to avoid possible damage caused by leaking.
• Do not plug or unplug the power cable if you have wet hands.
• If you are not planning to use the unit for an extended period of
time, disconnect the power cable from the wall outlet.
• Do not pull on the cord! You may damage the power cord and
may cause an electric shock when disconnecting the power cord
from the wall outlet. Pull firmly at the base of the plug.
ATTENTION - REPLACING THE BATTERY
17