Magnani MI-HA-AF6-B, User Manual

Page: 9 / 40

EN 07
• Place the device on a flat, stable surface, in a place where it cannot fall over.
• Connect the device to the mains power. The device generates 1 beep sound, the power ON/OFF button A
lights up, the timer display B shows - and the temperature display C shows --
• Allow the device to warm up for 15 minutes without any food inside .
• On the digital control panel, press the power button A to select a preset cooking program or set the
temperature and time to 15 min and press the power button A again to start the process.
• You will encounter a small amount of smoke and a specific smell the first time you use the
device. This is normal and will soon disappear. Make sure there is adequate ventilation.
Cooking / Frying
• Place the device on a flat, stable surface, in a place where it cannot fall over.
• Switch ON the device using the power ON/OFF button A .
• PRE-HEATING: set the desired temperature; set the time to 3 minutes; press the power ON/OFF button A to
start the pre-heating session and allow the device to warm up.
• After pre-heating, open the oven door
4
by its door handle
3
.
• Place foodstuffs in/on the selected cooking accessories.
Caution: Never make the selected accessories too full. A gap between the food ensures proper circulation
of hot air and prevents the food from making contact with the heating elements, which could create smoke and
cause unpleasant smells.
• Insert the selected accessories (rotisserie fork – rotating basket – mesh basket) using the fetch tool.
Caution: The device and accessories can be hot if they were in the device during pre-heating. Act carefully to
avoid injury.
• Make sure the drip tray is always installed while cooking!
• Do not fill the device with oil or other liquids.
• On the digital control panel, select the desired preset cooking program (see: PRESET COOKING
PROGRAMS) using the preset menu buttons H or set the desired temperature F and time G manually and
press the power ON/OFF button A to start the cooking process.
• The temperature display C indicates the temperature of the cooking program and the temperature display B
indicates the remaining cooking time in minutes while cooking.
• When the oven door
4
is opened during the cooking process, the process is paused, the device switches
off and the display becomes black. When the oven door
4
is closed again, a beep sounds to indicate that the
device continues with the remaining time of the cooking process.
• The device will start to operate and will stop automatically when the timer reaches 0.
• The alarm is activated once the set time has elapsed and 5 short double beeps can be heard. The device
stops heating after approximately 20 seconds and all indication lights switch OFF, the power ON/OFF button A
lights up, the timer display B shows - and the temperature display C shows --
• Use the fetch tool to remove the rotating accessories or wear oven gloves when removing the mesh basket or
drip tray. Place them on a stable, horizontal and flat heat-resistant surface.
• Caution:
Prevent burns. Do not touch any accessories, these are very hot. When removing any
accessories, use the fetch tool and wear oven gloves. Use a heatproof stand or coaster for extra support.
• Remove the food from the accessory and place it on a plate or dish.
• Do not use metal items to remove food from the accessories. This prevents the non-stick coating from being
damaged.
Caution: Prevent burns. When removing ingredients (e.g. beef, chicken, meat or other ingredients
with original oil or juices), excess oil or juices will have been collected at the bottom of the device on the drip
tray. While removing DO NOT turn the drip tray over, otherwise oil or juices collected at the bottom leak out onto
the surface of the device. Please use tongs to pick up these ingredients one by one in order to prevent hot oil or
juice spillages and possible burns.
• Excess oil, liquids or food residues are collected in the bottom of the drip tray. They must be removed
immediately after use, so they do not remain until the device is next used.
• Switch OFF the device if you are not going to continue using it and remove the plug from the power socket.
4) CLEANING AND MAINTENANCE
Clean the accessories and device after use.
• Remove the plug from the power socket and allow the device to fully cool down (± 30 minutes).
• Never immerse the device in water or any other liquid.
• Clean the device after each use.