21
OxyMag_rev26
4.
Preparation for Use
4.1
Assembling Oxymag
–
Transport Ventilation
Table 6 describes the steps to be followed by the operator (health care professional, duly trained and authorized to use the equipment)
to assemble and prepare the transport ventilator.
Table 6: Assembly Sequence of Oxymag
Assembly Sequence
OK
Figure
1. Insert the ambient air filter into the appropriate
slot on the left side of the ventilator. See chapter
11.5 Replacing the Ambient Air Filter.
□
2. Insert a diaphragm in the exhalation valve, then
insert the assembly into the base as shown in the
figure and press firmly and rotate clockwise to
lock.
Attention
•
To unlock the valve, press the
locking valve and turn the valve
counterclockwise.
□
3. Prepare the patient breathing circuit, firmly
connecting the inspiratory limb to the flow mixing
gas supply.
□
4. The expiratory limb of the circuit should be
securely connected to the exhalation valve.
□
