Magmaweld TD 355, User Manual

Page: 24 / 32

INSTALLATION&OPERATION
2.1 UPON RECEIPT AND CLAIMS
2. INSTALLATION
Ÿ
Be sure that you have received all the items that
you have ordered. In case of any tem s missing or
damaged, contact your supplier immediately.
Ÿ
In the event of damaged or missing delivery, draw
up a record, take a photo of the damage and
report
it to the shipping agency and MAGMA
MEKATRONIK with the photocopy of shipping bill.
Customer Serv ce +90 444 9 353
E-ma l: serv s@magma.com.tr
Fax: +90 236 226 27 28
Ÿ
Standard pallet conta ns:
ú
Power Source
ú
Electrode H older Cable
ú
Earth Clamp Cable
ú
User Manual
2.2 INSTALLATION AND WORKING RECOMMENDATIONS
TD 355 22
Ÿ
Use lifting eyes or fork-lift to carry the machine.
Transport and place the device on a firm and level
ground so that it may not fall over. The maximum
permissible angle of inclination for transport and
assembly is 10°.
Ÿ
For a better performance, keep the machine at
least 30 cm away from the surrounding objects.
Beware of excessive heat, dust and humidity
around the machine. Try not to operate the
machine under direct sunlight. Machines should
be operated on lower capacities when ambient air
temperature exceeds 40ºC.
Ÿ
Avoid welding at outdoors where it is windy and
rainy, if this is a must, protect the welding area with
curtains, mobile screens or tents.
Ÿ
Ensure that operators can easily reach the
machine controls and connections.
Ÿ
Use suitable welding fume extraction systems.
Use breathing apparatus if there is a risk of
inhaling in confined places.
Ÿ
Respect the duty cycles given at the data plate.
Exceeding the duty cycles frequently can damage
the machine and this would void the warranty.
Ÿ
Do not use stronger fuses than those stated on the
data plate.
Ÿ
Ensure that the earth clamp is tightly connected as
close as possible to the welding location. Do not let
welding current flow through any media other than
welding cables; e.g. over the machine itself, gas
tubes, chains, ball bearings, etc
.