24
MONOSTICK 200i PFC
2
3
4
5
6
8
1
7
9
Power Switch
Power LED
Thermic / Error LED
Current Adjustment Knob
1
2
3
4
Earth Cable and Welding Cable Socket (-)
Earth Cable and Welding Cable Socket (+)
Line Cable Inlet
Handle
Fan
5
6
7
8
9
TECHNICAL INFORMATION
1.2 COMPONENTS OF THE MACHINE
1. TECHNICAL INFORMATION
1.1 GENERAL EXPLANATIONS
Figure 1:
Components of Monostick 200i PFC
Monostick
200
i
PFC
is an inverter type portable, mono-phase DC MMA welding machine designed to weld stick
electrodes up to 4 mm. This unit can also be used as a DC TIG
*
power source for touch-start applications. Even
though the machine is mono-phase, due to the inverter technology it provides stable arc and good re-striking
performance, also the electric consumption is approximately 10% less than the silicon controlled rectifier
equipments and 25% less than the magnetically controlled equipments.
Monostick
20
0i
PFC
proved well that it can work between
170
to 240 V 50/60 Hz line voltages. Therefore this
machine is quite immune to mains voltage fluctuations and perfectly welds with generator-sets.
Monostick
20
0i
PFC
can also be used with long welding cables up to 25 mt. The machine is fan cooled and
thermally protected against over heating.
(*) For more information about TIG welding, check page 27.
