Figure 2:
TIG Welding Connections
AR
1.0
1.6
6.3
9.5
15 - 70
30 - 150
6 - 8
6 - 8
Install the Argon gas regulator onto the Argon gas
cylinder.
C
gas hose of the torch
the
regulator
onnect the
to
gas
.
Adjust the desired current and the machine is
ready to weld.
TIG torch with a valve should be
used.
the
t
power
cable
welding
socket
and the earth cable to
the positive welding socket
Connect
TIG orch
to the negative
of
the machine.
(5)
6
( )
Figure 3:
Connecting Gas Cylinder
9
MONOSTICK 200i PFC
SWITCH ON the machine via power switch
and
check if power LED
lights up and cooler fan
works.
(1)
(2)
While inserting the plug into the
socket, pay attention that main
switch is positioned to “OFF” “0”.
Before plugging your machine to the
electrical line, check if the correct
voltage exists.
INSTALLATION AND OPERATION
2.4 CONNECTIONS FOR TIG WELDING
Diameter of
Electrode
(mm)
Diameter of
Nozzle
(mm)
Welding
Current
(A
)
DC
Gas Debit
(lt/min)
