EN
12
www.magmaweld.com
USER MANUAL | KULLANIM KILAVUZU
MGA 800
MAINTENANCE AND SERVICE
When the grinding wheel wear and tear to the limit or there has been damage, cracks, deformation, or other defect,
it should be replaced promptly.
Regularly check every parts of the tool whether screw is loose, the loose one should be tightened promptly.
The vent must be kept clean and should be cleaned regularly and when it’s blocked.
Regularly check the power cord for scratched, damaged, plug for cracks or other defects, if the problems occur, they
should be an immediate repair.
Regularly check and replace carbon brushes. When the carbon brushes wear
to the limits, it must be replaced promptly. If there are two carbon brushes,
they should be replaced together. Keeping carbon brushes clean and sliding
freely within the brush holder.
3.1 Grinding Wheel
3.2 Screw
3.3 Carbon Brush
3.4 Cleaning
3.5 Power Cord
LIMIT LINE
4mm
Maintenance and Service