Magmaweld ID 350E, User Manual

Page: 11 / 96

11 ID 350E
EN
www.magmaweld.com USER MANUAL
1-
Current Adjustment Pot
7-
Welding Mode Selection Button
2-
Current Display
8-
Earth Cable and Welding Cable Socket (-)
3-
Voltage Display
9-
Handle
4-
Earth Cable and Welding Cable Socket (+)
10-
Remote Control Connector Inlet
5-
Hot Start Adjustment Pot
11-
ON / OFF Switch
6-
Arc Force Adjustment Pot
12-
Mains Cabla Inlet
TECHNICAL INFORMATION
1.1 General Information
ID 350E is an inverter type portable, tri-phase DC MMA welding machine designed to weld stick electrodes
up to 6.0 mm. Due to descending characteristics of the inverter technology it provides stable arc and good
restriking performance. Initial striking ability of the electrodes can be improved via Hot Start potentiometer
and certain electrodes like basic electrodes which have tendency to short circuit and stick to the weld pool
could be avoided by adjusting the Arc Force potentiometer. It can be used as a Touch-Scratch DC TIG* welder
if a TIG torch with a valve is connected. ID 350E can also be used with long welding cables up to 25 m. Plus,
wireless and cable remote control options are possible.The machine is fan cooled and thermally protected
against over heating.
Figure 1 : ID 350E
1
5
9
10 11
12
6
7
8
3
4
2
1.2 Machine Components
Technical Information